Ungrouped Paint System Cups

Unit Price:	13~15 USD
Min. Order:	500 Box

Product Description

TPS 2.0 > Ungrouped Paint System Cups

paint system cups Manufacturer Supply. 350ml pps cup,650ml paint system,850ml paint mixing cup

paint system cups for automotive paint mixing cups
Spec:
*The material of mixing cups and lids: PP
*The material of liners: PE
*The material of Collars: ABS
*Capacity: 400cc 600cc 800cc
*The outer cup with a pre-printed fluid level scale.
*The adaptor used for connecting cup lid and spray gun
*The Lid and Liner sits perfectly within the cup before being secured with the threaded collar.

How did Thunder Finish control paint system cup quality ?

Liners Control:
First check, When the liners come out from the machine.
Checkers will have a first check on the surface of all cups one by one. If some cups are bad look with black tiny spot, or
incomplete, they will throw into a big box, which stock all Unqualified liners.
Second check, daily checking with Lids.
Third check, when packing the liners each 25 pcs into polybag, packers will also check on the surface of liners for last time, to
avoid any missing at the First check.

Lids Control:
1.First check, When the lids come out from the machine.
Checkers will have a first check on the surface of all lids one by one. If some lids are bad look with black tiny spot, or
incomplete, they will throw into a big box, which stock all Unqualified lids.
2.Second check, inspector will pick up 5 pcs everyday, and measure the diameter, and deliver the report to the QC Manager
everyday.
3.Third check, when welding the filter for lids, workers will also check again on the surface of lids, to avoid any missing at the
First check.

How to test paint system cup in factory by ourselves?

Daily Inspection:
The main inspection issue is Leaking.
Every day, we have 2 times check on the leaking issues.
1.In the morning, 2 inspectors will pick up 5 sets paint system cups which just produced. And filled with water, combined with hard cups and
adapters. Then upturned on the table. They will check the if leaking or not. And after finish testing, deliver the Report to the
QC Manager.
2. In the Afternoon, 2 inspectors will pick up 5 sets paint system cup which just produced in the afternoon, and check the leaking issue. And
after finish testing, deliver the Report to the QC Manager.

Each batch quality control:
When we finish an order, we will have below inspection steps.
Check the cartons surface, if any cartons broken, we will replace new carton.
Check the marks on the carton, if it is as customers requirements or not.
Leaking inspection, inspectors will pick 10 sets from 10 boxes. And test by 2 times, morning and afternoon, 5 sets each time. Then
deliver the report to QC Manager. And QC Manager & Production Manager will check the results again. After both of them agree the
results, and then sign on the sheet, it means the order is agree to ship out.

Thunder Finish is a paint system cups and paint mixing cups manufacturer in China, we developed all moulds by ourselves , as a factory, you
can get the most competitive price from us, with most guaranteed quality. we have 30 workers to do paint system cup spray cup production,
packing and transportation.
Free Sample
You can get free paint system cups from Thunder Finish anytime, today you ask a sample, today the sample will be sent.
Best Service
As the beginning of our cooperation, you may inquiry about paint system cup ’s price, lead time, delivery time, shipping cost and so on, we
will reply your email in less than 5 minutes! That’s THUNDER FINISH’s efficiency.
Related products
We are also producing the hard cup, collar and adapters by ourselves, you can get all paint system cup related products from us, it will help you same time, less time wasted but all resource got.
Various sizes
paint system cup: 350ml 650ml 800ml
Paint Mixing Cups: 350ml 700ml 1400ml 2300ml

Sizes	350ML	650ML	850ML
One Box Packing	50liners	50lids	20caps

THUNDER FINISH CO., LTD

As a dynamically developing manufacturer, Thunder Tools are specialized in Mixing,Painting & Accessory industry for automotive refinishing.We have the whole production equipments and with a strong technology team to offer the innovation,to meet every customers requirements.With many years effort,Thunder has built the mature production line ,and strict inpection standard to control the quality,responsible for each customers. Thunder people always believe"Innovation makes possible".We keep the mind to improve the products be better and better.Our mission is to offer the excellent quality products and services at the most competitive pricing to our customers, in order to help them the great return on their markets.

Company Info

Company Name: THUNDER FINISH CO., LTD
Representative: Yang Xu
Product/Service: Paint System Cups , Paint Mixing Cups , masking taps , gloves , adaptors , strainers
Capital (Million US $): 1000000RMB
Year Established: 2015
Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
Export Percentage: 91% - 100%
No. of Production Lines: 4
No. of R&D Staff: 5 -10 People
No. of QC Staff: 5 -10 People
OEM Services Provided: yes
Factory Size (Sq.meters): 3,000-5,000 square meters
Factory Location: Ningbo China
Contact Person: Mr. Steve
Tel: 86--15868477696