Find Direct Acting 3/8'' AC220V 2 Way, 220VAC Normally Closed Electric Solenoid Valve, 2/2 Way NC Brass Electromagnetic Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Extruder Screw and Barrel > 2-Way G3/8'' VMI Type V10-C3C Granulator Solenoid Valve
2-Way G3/8'' VMI Type V10-C3C Granulator Solenoid Valve

2-Way G3/8'' VMI Type V10-C3C Granulator Solenoid Valve

Payment Type: L/C,T/T,Paypal,Western Union
Terms of Trade: FOB,CFR,EXW
Min. Order: 1 Piece/Pieces
Delivery Time: 4-8 Days

Basic Info

Model No.: V10-C3C

Product Description

2-Way G3/8'' VMI Type V10-C3C Granulator Solenoid Valve


Double screw granulator solenoid valve, plastic machine solenoid valve, extruder VMI type solenoid valve V10-C3C, connection size: 3/8'' inch, 1/2'' inch, material: brass, structure: 2 way normally closed, orifice size: 4mm, coil voltage: 230VAC, 110VAC, DC24V, mainly for twin-screw granulator, small-diameter solenoid valve features: small size, large flow, low power consumption. The internal design of the solenoid valve adopts direct-acting type and is suitable for high-frequency actuation control. Its iron core and coil adopt imported brand products to ensure the reliability of the working of the solenoid valve, and it should be used for long-term power supply. Especially suitable for the use of twin-screw extruders. Long service life and stable performance are well received by users. The size of the machine is different, the solenoid valve is also different, the size has 1/2'' and 3/8'' port.


Overall Dimension of 2-Way NC VMI Type V10-C3C Solenoid Valve:

2-Way NC VMI Type V10-C3C Solenoid Valve


Technical data of 2/2 Way NC VMI Type V10-C3C Solenoid Valve:

Model No V10-C3C
Valve type VMI Type Solenoid Valve
Orifice size 4mm
Port size G3/8'' inch, G1/2'' inch
Normal voltage AC220V, DC24V (Or Customized)
Operation 2-Way Direct acting
Function NC (Normally closed)
Body material Brass
Seal material NBR (Or Customized)
Temperature range -10 to 140°C
Pressure range 0-16bar

Deconstruction diagram of VMI Type V10-C3C Granulator Solenoid Valve:

VMI Type V10-C3C Granulator Solenoid ValveVMI Type V10-C3C Granulator Solenoid Valve


Details diagram of VMI Type V10-C3C Extruder Electomagnetic Valve:

VMI Type V10-C3C Extruder Electomagnetic Valve


What are the cooling methods for the extruder during the extrusion process?
1. Natural cooling of the air: low cooling efficiency and inconvenient temperature control.


2. Wind cooling: By controlling the start and stop of the cooling fan or controlling the opening and closing of the cooling air duct valve, the temperature of the barrel of the section is cooled by the wind. The cooling rate is slow, and it is not suitable for machines with more internal heat generation.


3. Soft water cooling: control the opening and closing of the V10-C3C solenoid valve of the cooling water circuit, so that the soft water can take away heat through the water channel of the barrel to achieve the purpose of cooling. In addition to soft water cooling, it is necessary to add cold water to cool the heated water. This method has a fast cooling rate and is easy to control. However, the cooling inertia is large, and the disadvantage is that the temperature control table, the V10-C3C solenoid valve, and the design of the cooling water channel in the control process are relatively high.


4. Heat transfer oil cooling: The principle is similar to soft water cooling, except that the heat transfer medium is different. Relative to soft water cooling heat transfer oil cooling and cooling is relatively even and soft. However, the sealing requirements for the pipeline are high, otherwise the consequences of oil leakage will be more serious.


Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change

√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info
  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters